SANIT 100-250 is a range of hot water tanks with capacities from 100 - 250 litres, manufactured in stainless steel, for supplying domestic hot water.
They include a double-wall "water bath” type heat exchanger and can be used with any type of heating power (thermal solar, gas, gas-oil, electricity, biomass, heat pump, etc).
Dual-chamber tanks for production and storage of domestic hot water, with capacities ranging from 100 litres to 130 litres.
Coupled with a heating boiler, DOMUSA TEKNIK is able to provide the right level of comfort for your home and a produce a balanced and economical domestic hot water production, always accompanied by a suitable hydraulic installation.
The careful design of the tank and casingallows the tank to give exceptional performance, enabling its use with a boiler, solar panel, or heat pump.
The SANIT tanks are built of stainless steel, complying with the strictest hygiene requirements. This material also has a high transmission coefficient that provides the tank a great capacity to produce domestic hot water.
Stainless steel is a material with exceptional properties against possible peeling of peeling, oxidation, and sedimentation.
On its surface, a patina is created naturally, causing a self-protection that prevents oxidation even in installations with extremely corrosive waters.
| MODELS | SANIT GR 100 | SANIT GR 130 | |||
|---|---|---|---|---|---|
| Characteristics | |||||
| Installation | Floor-mounted | Floor-mounted | |||
| Total volume | L. | 100 | 130 | ||
| Max. storage temperature | ºC | 90 | 90 | ||
| Maximum working pressure of the tank | bar | 7 | 7 | ||
| Max. primary temperature | ºC | 110 | 110 | ||
| Maximum primary working pressure | bar | 3 | 3 | ||
| Operation | |||||
| Continuous flow l/h D 30º | Qp 1 m3/h Qp 3 m3/h Qp 5 m3/h |
602 745 831 |
655 798 882 |
||
| Peak flow l/10 min D 30º | Qp 1 m3/h Qp 3 m3/h Qp 5 m3/h |
266 290 305 |
325 349 363 |
||
| Flow up to 1 hour l/h D 30º | Qp 1 m3/h Qp 3 m3/h Qp 5 m3/h |
702 845 931 |
785 928 1,012 |
||
| Power transmitted kW | Qp 1 m3/h Qp 3 m3/h Qp 5 m3/h |
21 26 29 |
23 28 31 |
||
| DHW efficiency class |  |
||||
Qp: Primary flow rate / Primary temperature 80°C / Storage temperature 60°C
| Model | SANIT GR 100 | SANIT GR 130 | |
|---|---|---|---|
| A | mm | 650 | 740 |
| B | mm | 115 | 105 |
| C | mm | 250 | 340 |
| Height | mm | 840 | 840 |
| Base dimension | mm | 550 x 600 | 550 x 600 |
| Return | RACS Ø | 1/2” M | 1/2” M |
| Cold water input / Hot water output | ES/SSØ | 3/4” M | 3/4” M |
| Primary pump | Automatic air bleed valve |
| Thermometer | Non-return valve |
| Adjustable thermostat | Dielectric sleeves |
| On/off switch | Safety unit |
